Low voltage DC servo driver
24V 800W 48V 1500W Brushless servo driver
Kydbl4875-1e is an intelligent DC motor controller. The controller uses high-performance 32-bit MCU, advanced motion control algorithm and external orthogonal encoder input to complete the motor motion under open-loop, closed-loop speed and closed-loop torque. The controller has many analog input ports, pulse input ports and digital I / O ports. Its functions can be redefined by special software. General RS232, can bus serial communication, can be widely used for automatic operation.
◆ wide voltage input.
◆ intelligent PID control ring.
◆ four working modes: open-loop control, closed-loop speed control, open-loop and closed-loop torque control.
◆ external potentiometer, external 0-5vdc analog quantity or pulse command control mode, RC control mode.
◆ safe forward & reverse control, four quadrant operation, support regeneration.
◆ enable control function.
◆ max current limit.
◆ 4 input ports, functions can be defined as analog input, pulse input or digital input.
◆ 2-way MOS drain open circuit output is generally used as 24V1A output port (max load capacity is 40V 1a), which can be used to release the brake or other accessories.
◆ over current, over temperature, over voltage, under voltage, short circuit and other abnormal conditions start protection function.
◆ LED status indication, fault alarm output.
◆ for CAN bus communication, please refer to the detailed communication protocol when customers use it.
◆ for RS232 communication, please refer to the detailed serial port protocol when customers use it.
1. Power supply voltage: 10-50VDC.
2. The continuous working current is 40A and the instantaneous current is up to 75A 10s.
3. Out + 5VDC power supply (can supply power to encoder): 5V DC 20mA.
4. Analog input range: 0-5vdc.
5. Pulse input range: 500hz-5000hz (corresponding to max speed)
[note] the Min pulse frequency will vary with the max speed setting.
6. Duty cycle input range 0% -- 100% (input frequency range f ≤ 1kHz, 250Hz is recommended)
7. Digital output interface: 2 channels, open drain, max load capacity of 40V 1A
8. Temperature protection status: 70 ℃ overheat protection reduces output, 80 ℃ stops output.
9. Working environment temperature: - 30 ℃ - + 60 ℃.
10. Environmental humidity: relative humidity ≤ 80rh.
11. Boundary dimension: L * w * H = 147mm * 117mm * 75mm
Note: it can be customized according to customers' requirements. For details, please consult customer service.