DC motor driver
DC12/48RT100BL-XW Product introduction
The driver uses high-performance MCU and advanced motion control algorithm. It can be used in special functional occasions. It can be controlled by external analog quantity, pulse width control and potentiometer speed regulation, soft start and soft stop can be set, max current and motor torque can be set, motor forward and reverse can be independently selected, motor forward and reverse max current can be independently set, forward and reverse limit can be independently controlled The driver is equipped with a fault alarm output terminal, which can more effectively protect the reliability and safety of the whole set of equipment, and can be widely used in the automation control industry.
1、 Product features:
◆ small size.
◆ wide voltage input.
◆ multiple control modes: potentiometer, analog control, pulse width control.
◆ independent forward & reverse control, with inching or self-locking.
◆ acceleration and deceleration time can be set respectively.
◆ independent forward limit & reverse limit.
◆ brake control function.
◆ rated current limit.
◆ it has low-speed torque compensation function.
◆ over current, over temperature, over voltage, under voltage, short circuit and other abnormal conditions start protection function.
◆ led fault alarm status indication, fault alarm output.
2、 Performance index:
1. Power supply voltage: 10-50VDC.
2. Standby current: 6mA.
3. Continuous working current: 50a, high instantaneous current: 100a-60s.
4. Working frequency: 2KHz.
5. Out + 5VDC power supply (can supply power to potentiometer): 5V DC 20mA.
6. Analog input range: 0 -- 5VDC (factory default), 0 -- 10VDC (instructions when ordering).
7. Soft start time: 0-5s.
8. Soft stop time: 0-5s.
9. Pulse input frequency: 250Hz.
10. Duty cycle input range 0% -- 100%.
11. Digital output interface: max load capacity is 24v20ma.
12. Temperature protection status: stop output at 85 ℃.
13. Working environment temperature: - 30 ℃ - + 60 ℃.
14. Environmental humidity: relative humidity ≤ 80rh.
15. Boundary dimension: L * w * H = 210mm * 115mm * 63mm
16. Weight: 975g
3、 Boundary dimension: L * w * H = 210mm * 115mm * 63mm