220v350w with 485 communication brushless driver
Commodity details
Performance characteristics
technical parameter
DC brushless driver
LKDBLS-06-S Product introduction
1. Overview:
Lkdbls-06-s brushless motor driver is a high-power driver independently developed by lanjiu company to cooperate with the field of modern industrial automatic control. It is mainly composed of foreign high-performance special-purpose brushless DC motor driver chip, which has a series of advantages such as high integration, small size, perfect protection, simple and clear wiring, high reliability, etc. The driver is suitable for driving small and medium-sized BLDCM with rated power below 350W. The driver adopts a new PWM technology, which makes the BLDCM run at a high speed, with small vibration, low noise, good stability and high reliability. Support Modbus communication protocol and RS485 interface.
2. Product features:
1. system characteristics:
Input power 110 / 220VAC 50 / 60Hz
Continuous output current: 2A, suitable for BLDCM under 350W
Max output current: 3A
Operating temperature 0 ~ + 45 ° C
Storage temperature - 20 ~ + 85 ° C
Use and storage humidity < 85% [no frost conditions]
Structural wall mounted box type
2. Basic characteristics
Cooling mode: radiator mode
Control signal input and output signal: fully isolated
Protection function: over current, over temperature, over speed, over voltage and under voltage control power supply is abnormal
III. installation dimension: 166 * 51 * 102mm
4. Means of communication:
The communication mode adopts standard Modbus protocol, which conforms to the national standard GB / T 19582.1-2008. Two 3-core Phoenix terminals with a distance of 3.81mm are used for the physical interface. The serial connection is very convenient. Transmission mode RTU, validation mode CRC, CRC start word ffffh. Data mode 8-bit asynchronous serial, 2-stop bit, invalid check bit, supporting multiple communication rates (see parameter table for details).
Note: if it is necessary to control the motor in communication mode, it must be carried out in internal speed regulation mode.