1000W driver with digital display interface

DC motor driver DC motor driver DC motor governor

220DR10AL Product introduction

220dr10al DC motor driver is a speed regulating product developed and produced on the basis of absorbing the past successful experience and combining with modern advanced technology. This series of products have reached the international standard requirements and are exported to many countries. The driver adopts SCR chopping principle and unique triggering mode, and can achieve high speed ratio without speed feedback, so its control is more accurate and reliable. The excellent performance, reliable quality and high cost performance of the product make it a leader in the field of DC motor drive. It is widely used in plastic machinery, food machinery, cable equipment, mechanical processing, paper printing, test equipment, laboratory equipment, mixing equipment and other fields

1、 Product features:

■ small size with SMT technology

■ suitable for permanent magnet, separately excited and DC torque motors

■ double closed-loop PI regulation (voltage, current)

■ current setting and current limiting protection (set current for continuous operation)

■ speed control mode and panel control mode (need to be equipped with digital display control panel sx-r02 additionally)

Display interface of sx-r01 digital display meter

■ high output torque at low speed

■ quick stop function

■ arbitrary setting of upper and lower speed

■ soft start, soft stop setting function

■ standard signal input 0-5V or 10K potentiometer control driver speed regulation

■ good follow-up and fast response

■ wide speed regulation ratio and hard mechanical characteristics

2、 Specification and model:

3、 Technical parameters:

Input voltage AC: 220V ± 10% (other voltages can be customized according to customer requirements)

Frequency: 50 / 60Hz ± 5%

Output voltage DC: 0 ~ 90V 0-110v 0-160v 0-180v 0-220V (can be set)

Rated excitation current: (dc110v or 220V) 3A

Rated output current: 10A

Speed regulation ratio: 80:1

Output voltage accuracy: ≤ 0.1%

Environment temperature: - 10 ℃ ~ + 60 ℃

Environmental humidity: relative humidity ≤ 65% (no condensation)

4、 Product performance:

1. It has relatively hard mechanical properties, with a static error rate of 1%.

2. It has a wide speed regulation range, (0-max speed Max SPD setting value).

3. It has a fast dynamic response process.

4. It has automatic and smooth transition process during acceleration and deceleration.

Five

5. Good excavator characteristics can automatically limit the overload current to the set value current.

6. High reliability, compact structure and high cost performance

5、 Installation size:

L*W*H=150mm*115mm*60mm

6、 Wiring diagram:

7、 Selection of control signal input mode:

This series of products are designed in the way of full isolation, and the external given signal can be directly connected with the signal input end of the driver.

Note: it is recommended to use shielded wire for potentiometer connection.

No evaluation information！