200W explosive double way brush servo driver

Double drive brush servo driver

Two way brush servo motor driver

24V 200W 48V 400W DC brush servo driver dual channel dual channel

Kyds2420-2e is an intelligent DC dual motor controller. The controller uses high-performance MCU, advanced motion control algorithm and external orthogonal encoder input to complete motor motion in open-loop, closed-loop speed and closed-loop position mode. It can be widely used in robot walking, small vehicle walking and other automatic operations.

Product features:

◆ two independent output stages.

◆ wide voltage input.

◆ intelligent PID control ring.

◆ multiple ways of working:

Double motor independent open-loop control, double motor independent closed-loop control

Dual motor hybrid open-loop control, dual motor hybrid closed-loop control (for tank type rotation).

◆ external potentiometer, 0-5vdc analog quantity, PWM, RC.

◆ safe forward & reverse control, four quadrant operation, support regeneration.

◆ emergency brake control function.

◆ 2-way MOS drain open circuit output is generally used as 24V1A output port (max load capacity is 40V 1a).

◆ max current limit.

◆ over current, over temperature, over voltage, under voltage, short circuit and other abnormal conditions start protection function.◆ LED indicator status indication, fault alarm.

◆ for RS232 communication, please refer to the detailed serial port protocol when customers use it.

◆ CANopen communication, please refer to the detailed serial port protocol when the customer uses it

Performance index:

1. Power supply voltage: 10-50VDC.

2. Double peak current 20A. Two way continuous working current 12a

3. Out + 5VDC power supply (can supply power to encoder): 5V DC 20mA.

4. Analog input range: 0-5vdc.

5. Frequency input range: 500hz-5000hz, voltage amplitude: upper limit of 5V pulse input corresponds to max speed of motor.

6. PWM pulse width input range: frequency 250hz-1khz, typical value: 250Hz

Duty cycle 0% - 100%. The voltage amplitude is 5V.

7. RC signal (a PWM signal: the signal output by the remote control receiver of the aircraft model)

8. Digital output interface: 2 channels, open drain, max load capacity of 40V 1A

9. 70 ℃ overheat protection, 80 ℃ stop output.

10. Working environment temperature: - 25 ℃ - + 60 ℃.

11. Environmental humidity: relative humidity ≤ 80rh.

12. Boundary dimension (including radiator): L * w * H = 90mm * 75mm * 35mm

13. Weight: About 250g.

Note: it can be customized according to customers' requirements. For details, please consult customer service.

No evaluation information！